Brake fluid Eurol DOT 4 1L
Commandez avant 21h, le produit sera livré demain
Échange sous 30 jours
Les clients nous donnent une note de 8,7/10
Garantie 3 ans
Need Help Ordering
Give our chat widget a try
Brake fluid for hydraulic drum and disc brake systems Eurol Brake Fluid DOT 4 is a high-quality medium that has been specially developed for hydraulic braking systems of cars, trucks, mopeds, scooters, forklifts, motorcycles, etc. in both drum and disc brakes (with and without ABS/ASR). Eurol Brake Fluid DOT 4 offers maximum protection against rust and optimal acceptance and transfer of heat. It does not affect seals, metals or alloys. Due to the lubricating power of these brake fluids, wear is kept to a minimum. Eurol Brake Fluid DOT 4 is stable and does not cause deposits. Due to the low viscosity at low temperatures, it still performs excellently in winter conditions. Eurol Brake Fluid DOT 4 has a high 'wet boiling point', which prevents the formation of vapor during intensive braking. This considerably increases the safety and operational reliability of the braking system. However, it is of the utmost importance to change or check the brake fluid in time; any brake fluid absorbs water, which leads to a loss of quality over time. Eurol Brake Fluid DOT 4 must absolutely not be used on brake systems with mineral-based fluid (LHM, usually green colored) or silicone brake fluid (purple colored, usually indicated with DOT 5). "Note: Brake fluid is incompatible with, among other things, car paints; in the event of spillage, the brake fluid must be removed immediately with water. Keep container tightly closed and avoid mixing with water or oil products. " | |
| Parameter | DOT 4 |
| Content | 1 Litre |
| DOT specification | DOT 4 |
| Flash point | 120 °C |
| Density at 20 ° C | 1.035 kg/l |
| Pour point | -36 ° C |
| Dry Boiling point | 260 °C |
| Wet boiling point | 155 °C |
| Application | Brake Fluid |
| Specification | FMVSS 116 DOT 4 |
| ISO 4925 Class 4 | |
| Guarantee | 2 years |
Show all specifications | |
